|
Specifications
Print Method: HDP
Dye-Sublimation / Resin Thermal Transfer
Resolution: 300 dpi (11.8 dots/mm)
Colors: Up to 16.7 million / 256 shades per pixel
Print Ribbon Options:
-
Full-color, YMC*, 700 prints
-
Full-color with resin black,
YMCK*, 500 prints
-
Full-color with two resin
black panels, YMCKK*, 400 prints
-
Full-color with resin black
and heat seal panel for difficult-to-print surfaces, YMCKH*, 400 prints
-
All HDP ribbons utilize
Fargo�s exclusive RibbonTraq� system for maximum print quality,
performance, reliability and ease of use.
HDP Film Options:
Overlaminate Options:
-
Thermal Transfer
Overlaminate, .25 mil thick
-
PolyGuard Overlaminate, 1.0
mil and .6 mil thick
-
All overlaminates available
in clear, holographic globe design or custom holographic design.
PolyGuard available in a CR-80 patch size.
Print Speed:
-
44 seconds per card / 82
cards per hour (YMC with transfer)*
-
54 seconds per card / 66
cards per hour (YMCK with transfer)*
-
79 seconds per card / 45
cards per hour (YMCKK with transfer)*
-
55 seconds per card / 65
cards per hour (YMCK/lamination)*
-
80 seconds per card / 45
cards per hour (YMCKK/lamination)*
Accepted Standard Card
Sizes: CR-80 (3.375�L x 2.125�W / 85.6mmL x 54mmW)
Print Area:
Accepted Card Thickness:
Accepted Card Types:
ABS, PVC, PET, PETG, proximity, smart and mag stripe cards, optical
memory cards
Input Hopper Card Capacity: 200 cards (.030� / .762mm)
Output Hopper Card Capacity: 100 cards (.030� / .762mm)
Memory: 8MB RAM
Display: User-friendly, SmartScreen LCD Control Panel; LED
Display on Card Lamination Module
Software Drivers: Windows� 2000/XP
Encoding Options:
-
ISO Magnetic Stripe Encoding
Module, dual high- and low-coercivity, Tracks 1, 2, and 3
-
JIS II Magnetic Stripe
Encoding Module
-
E-Card Docking Station
(required for all e-card options or 3rd party smart card encoding)
-
Contactless Smart Card
Encoder (HID iCLASS and MIFARE)
-
Contact Smart Card Encode
reads from and writes to all ISO7816-1/2/3/4 memory and microprocessor
smart cards (T=0, T=1) as well as synchronous cards
-
Prox Card Encoder (HID
read-only)
System Requirements:
IBM-PC or compatible, Windows 2000/XP, Pentium� class 233MHz computer
with 64MB of RAM or higher, 200MB free hard disk space or higher and
available USB port
Interface: USB 1.1 (Optional Centronics Parallel, IEEE 1284
compliant)
Operating Temperature: 65� to 80� F / 18� to 27� C
Humidity: 20-80% non-condensing
Dimensions:
-
Printer: 10.75�H x
22.5�W x 13�D / 275mmH x 570mmW x 330mmD
-
Printer + Lam:
10.75�H x 35�W x 13�D / 275mmH x 890mmW x 330mmD
-
Lam Module: 10�H x
12.5�W x 10.25�D / 255mmH x 318mmW x 260mmD
Weight:
-
HDP600: 39 lbs. /
17.7 kg
-
HDP600 + Lam: 58 lbs.
/ 26.4 kg
-
Lam Module: 19 lbs. /
8.7 kg
Agency Listings:
-
Safety: UL 60950, CSA
C2.2 No. 60950, CB report (EN 60950), CE mark
-
Emissions: FCC Part15
Class B, EN 55022: 1998 Class B, CRC c1374, ITS EMC mark, EN 61000-3-2:
2000, EN 61000-3-2: 1995, EN 55024: 1998, CE mark
Supply Voltage:
100-240 VAC, 4.25A
Supply Frequency: 50 Hz / 60 Hz
Warranty:
Fargo Certified Supplies:
Fargo Card Printer/Encoders require highly specialized media to function
properly.To maximize printed card quality and durability, printhead life
and printer/encoderreliability, use only Fargo Certified Supplies. Fargo
warranties are void, where not prohibited by law, when non-Fargo
Certified Supplies are used.
Options:
*Indicates the ribbon type
and the number of ribbon panels printed where Y=Yellow, M=Magenta,
C=Cyan, K=Resin Black, H=Heat Seal
|
Login 
ID Card Printers
